new update 3.0.4.00

[Werner schijvenaars]

I'm new at this forum so hello everybody.
It look like i had te read this forum a little earlier.


i bought an virus TI2 resent and up to now it seems an very bad investment.
with os 3.03 i did suffer the sneezing problem everybody explains. but only ones or twice a day.

so i did try the new 3.04 os to see if this would solve this.

Wel now it is hopeless, my cubase is crashing al the time
Cubase is saying an serious error occurred, and then it closes.

it does this every 5 min making it completely useless.

so i tried to go back to 3.03 by installing the 3.03 software from the Access website, unfortunately it makes no difference at all.

I even completely re installation of my system from scratch
with only cubase and virus, it still is crashing.

starting the Virus controll center sometimes give blue screens,
In the controll center it say's OS 3.03
but when it is updating the virus the screen on the virus says Update mode 3.04

so it looks like there is still some 3.04 in the virus, is there an special procedure for going back to 3.03.

at this moment i would be very happy with the situation it was before.

anyone experience with downgrading the OS ??

Regards

Werner

[Doc Jones]

Hi Werner, welcome to the forum. Bummer you are having so many problems. Can you post a little more info about your daw's configuration - (eg OS, 32 v 64 bit, service pack level, sound card etc.)

also, I may be able to debug your dump file (created with your computer blue screened - assuming it is a windows machine). PM your email address and I'll give you mine to email over the dump file.

[Werner schijvenaars]

Originally Posted by Doc Jones

Hi Werner, welcome to the forum. Bummer you are having so many problems. Can you post a little more info about your daw's configuration - (eg OS, 32 v 64 bit, service pack level, sound card etc.)

also, I may be able to debug your dump file (created with your computer blue screened - assuming it is a windows machine). PM your email address and I'll give you mine to email over the dump file.

Hello,

2 doc Jones these are mine setup configurations i send jou an PM.
Intel Core i7 920 - Motu HD192 - Uad2Quad - Powercore mkII
Windows XP 32 SP3 - Steinberg Cubase 5.01 - Midex 8


But anyone experienced with goeing back to 3.03,
when i load Virus control the display on the virus keeps saying "Update mode 3.04"
that looks strange to me becouse i already installed 3.03 (multiple times).

Thanks

[h4nc0]

Originally Posted by Werner schijvenaars

Hello,

2 doc Jones these are mine setup configurations i send jou an PM.
Intel Core i7 920 - Motu HD192 - Uad2Quad - Powercore mkII
Windows XP 32 SP3 - Steinberg Cubase 5.01 - Midex 8


But anyone experienced with goeing back to 3.03,
when i load Virus control the display on the virus keeps saying "Update mode 3.04"
that looks strange to me becouse i already installed 3.03 (multiple times).

Thanks

There's Virus Control.dll in C:\Program Files\Access Music\Virus TI\Common which stays at 3.0.4 even if you install 3.0.3. Just delete the whole folder and reinstall.

[gnome]

werner , 100's of people have ahd these issues, its a virus ti and thats what they do , honestly i give up on mine , its a substandard faulty synth which access know has design issues , hardware problems and bad build quality .

Originally Posted by Werner schijvenaars

i bought an virus TI2 resent and up to now it seems an very bad investment.
with os 3.03 i did suffer the sneezing problem everybody explains. but only ones or twice a day.

so i did try the new 3.04 os to see if this would solve this.

Wel now it is hopeless, my cubase is crashing al the time
Cubase is saying an serious error occurred, and then it closes.

it does this every 5 min making it completely useless.

so i tried to go back to 3.03 by installing the 3.03 software from the Access website, unfortunately it makes no difference at all.

I even completely re installation of my system from scratch
with only cubase and virus, it still is crashing.

starting the Virus controll center sometimes give blue screens,
In the controll center it say's OS 3.03
but when it is updating the virus the screen on the virus says Update mode 3.04

so it looks like there is still some 3.04 in the virus, is there an special procedure for going back to 3.03.

at this moment i would be very happy with the situation it was before.

anyone experience with downgrading the OS ??

Regards

Werner

[Chicago]

Originally Posted by gnome

werner , 100's of people have ahd these issues, its a virus ti and thats what they do , honestly i give up on mine , its a substandard faulty synth which access know has design issues , hardware problems and bad build quality .

Now you are just talking absolute nonsense, gnome.

1. You have no idea how many people are having issues and how many are not, you pulled this number out of thin air.

2. There is nothing "substandard" about any Virus. Period. If you think the build quality is "bad", I am assuming you are new to the synth game, and again, are pulling this out of thin air.

3. Since you are in absolutely no position to comment on "hardware problems" or "design issues", this is potentially slanderous as you are making this up.

4. Could there be some bugs with 3.0.4? Sure, and Access will fix them surely. But looking at some of your statements, it looks to me like you did not even open the user manual, and have a very limited understanding of how the Virus works.

Sorry man, someone had to check you. Your post does not speak for all of us at all. I have done many projects with the TI, and the TI was a vital part of each.

[HUEY]

Originally Posted by Werner schijvenaars

but when it is updating the virus the screen on the virus says Update mode 3.04

so it looks like there is still some 3.04 in the virus, is there an special procedure for going back to 3.03.

at this moment i would be very happy with the situation it was before.

anyone experience with downgrading the OS ??

Regards

Werner

My procedure for downgrading the OS: (It always worked for me)
*Do a good de-installation of all software and drivers (Via installed software in Windows)
*Force the Virus Ti in update mode (Holding down the exit button while powering up)
*Run the "older" software-installer, in this case 3.0.3
*After downgrading reset your virus!! Remove the power cabel for 30 sec. Hold down the "ARP-edit" button a few secconds while powering up

That's it

Hopefully it works for you

best r