> Unsolved < Loosing MIDI after awhile...

[demoakuten]

Hi everybody!
Got myself a TI keyboard and Im happy. Still there is something bugging me and that is the following issues:

1> I run my SX3 at 2.8 ms in latency with the audiocards ASIO, but It feels like I have it set to something like 7-10 ms? All other synths responds directly and feels very direct but the TI feels a little slow.....Any suggestions there?

2> If I leave the studio for a cup of coffe or so for an hour, then when I get back the MIDI has gone home for the day. DEAD. Then I try to restart the virus with the arp-key and finally when that doesn´t do it, I have to restart SX as well. In most cases it works after that, but hey guys, I gotta tellya THAT is really annoying!!!!!!
Anyone?
/Read something about the IRQ on the USB which could be a solution. Will try that tonight....a conflict I mean...

Otherwise I love it and Im quite satified!! Just wish I will come over a page where I can find millions of banks with sounds to it. Should be hundred of those?..

BEst musical regards to everyone!

//danny

[feedingear]

I've never had MIDI drop out if left for an extended period of time in Virus Control on SX3. I have noticed in single mode that sometimes the TI voices, if left alone and unplayed for some time, sound like the filters turn off/stop working, and I have to toggle through patches to make the sound correct again.

[demoakuten]

Ok, that sounds weird as well....Now I installed a USB-fastcard 2.0 and reinstalled virus as well over that usb-port. Now I can only wait and see what happens....

Its strange that it looses its MIDI when left alone...I mean, I leave it with a project on where I have like three MIDIch running my TI and all is well...but after a break for lets say an hour or so It has lost its connection and SX is not possible to find it......
h e l p !

//DF

[Ronkaz]

1) turn off the standby (Power management)
2) Cubase does not re open MIDI ports when they are gone once which is because of 1 I think.

r

[demoakuten]

Ahaaaaaa...you think i MIGHT have forget to turn it off? Well you may be right there because the studiocomputer is recently formatted!!! I will have a look at that and may take the opportunity to appologize to all infected Virusists that I dared think it was the virus that was bad. :O)

I think this is it!

Thanks for the remind!

//DF

[annikk.exe]

Not sure if you're using Mac or PC. If it's PC, this fix should work, and will take less than 5 minutes:



1. Go to Device Manager
Vista: Start -> Control Panel -> Classic View -> Double-click "Device Manager" icon
XP: Start -> Right-click My Computer -> Choose "Properties" -> Click the "Hardware" tab -> Click "Device Manager" button


2. In the list, expand "Universal Serial Bus controllers"


3. A sub-list opens up. Go through the sub-list doing the following to each item:


i) Double-Click it

ii) Go to the "Power Management" tab, if there is one, and uncheck "allow the computer to turn off this device to save power" (some items won't have a power management tab, so just skip this step for those items)

iii) Click OK





4. Close Device Manager, close Control Panel, restart the computer.


That should sort you out :>


-Annikk