TI desktop no booting up.

[tk]

Originally Posted by glendale

Doesn't work for me ... as soon as the power is plugged to the TI (whether the sequenzer or computer is started doesn't matter at all), there's a blank screen. de-plug and re-plug and it boots up.

A friend told me, that it really might be a hardware-defect with a condenser ...

To reset the TI unplug the power cord, press and hold [ARP EDIT] and plug the power cord in, when BPM and the Access LED in the Mixer section are blinking, release the [ARP EDIT] button.

If this happened after a failed OS update, you might boot the TI into "update mode" which is by holding [EXIT] during a powercycle and run the firmware updater afterwards.

Have you already contacted access support?

tk