what in the world? My virus TI is out of tune???

[ddeez]

i've gone to all the transpose windows (i think) i've gone to global tune...but my virus isn't in tune with the rest of my synths...? what gives? is it cuz of the OS 3.0?? should i install the old one?

[hdruxpin]

believe it or not, rolling back to 2.7.5 will not fix it.

i had this issue with my snow.

unplug the usb, and then go into the settings on the ti itself, until you find master tune. IT WILL BE OFF 0

hope this helps

[Prime NL]

Please check your config of your Virus Snow...i think that your source: auto
frequency: synced to host is not set to the right frequency (44 or 48 kHz).

So please check this setting and change accordingly....this can differ half a note or so.

[digitalgeist]

Same problem here, I go to work on a project in Cubase and all the sudden it's way out of tune.

[digitalgeist]

Originally Posted by Prime NL

Please check your config of your Virus Snow...i think that your source: auto
frequency: synced to host is not set to the right frequency (44 or 48 kHz).

So please check this setting and change accordingly....this can differ half a note or so.

For me changing the master tune in config to -63 for some reason fixed it. All was well after that; but what an odd quirk. The OS updates have been like this for a while with me though since 1.0.5 - one is totally rock solid for me, the next creates awful pitch-shifting delay and is totally off time, the next is rock solid, etc.

[Fracturism]

Originally Posted by Prime NL

Please check your config of your Virus Snow...i think that your source: auto
frequency: synced to host is not set to the right frequency (44 or 48 kHz).

So please check this setting and change accordingly....this can differ half a note or so.

Thanks - yes this is it. Many software programs allow you to record/listen at 48khz - if your Virus is running at 44.1khz the sample rate disrecpency will screw the tuning.

I did as above & its fixed - thanks