Do i need a mixer?? help please

[prophet]

Hi guys

Got an issue id like to find a solution for..

My hardware:

Access Virus TI Desktop
Roland JP 8080
Sherman Filterbank
Electrix Warp Factory
Presonus Firebox
Shure SM58 mic

Pentium 4 Inta Audio PC...

Basically im wondering how i can have my virus set up the correct way, yet have all the above mentioned gear all hooked up as well with minimal fuss.

Id like to set the Virus up exactly as instructed in the manual, my DAW is Ableton 6....but id like to find the best solution.

I want to record out from Ableton into my effect racks like the Filterbank...then back into ableton......i dont know how.

So am i going to need a mixer....or is this possible using the virus, and the firebox...I can forsee a problem with my mic as this wont go into the virus...

Any advice is most appreciated!

Thanks

[prophet]

An example of how id like to work is say a percussion loop...well say i wanna run it thru some effects gear to mess it up.....well id like to run it back into ableton on a new audio track.....

Or if i have a recorded vocal or something u know..thru the vocoder and back in....

Im stumped!!

[Onkel Dunkel]

Get a mixer and a patchbay. This is the best way to have full control of your gear routing. In goes all synths, audiointeface outputs, effect returns, etc. and out goes to mixer inputs, effect inputs, synth ext. inputs, etc. then out of the mixer to your audiointerface. If you need to route your Virus to your Sherman Filterbank just plug the Virus out to the Filterbank in on the patchbay. Only downside is that you need twice as many cables but when everything is hooked up and you get used to working this way you will love it...

[prophet]

Originally Posted by Onkel Dunkel

Get a mixer and a patchbay. This is the best way to have full control of your gear routing. In goes all synths, audiointeface outputs, effect returns, etc. and out goes to mixer inputs, effect inputs, synth ext. inputs, etc. then out of the mixer to your audiointerface. If you need to route your Virus to your Sherman Filterbank just plug the Virus out to the Filterbank in on the patchbay. Only downside is that you need twice as many cables but when everything is hooked up and you get used to working this way you will love it...

Thank you

That sounds pretty complicated...do i still require my firebox to be connected to my cpu..and a mixer connected to my firebox, also how does the patch bay connect to it all..........??

I do apologise, im just so confused with it all...if i can nail this ill be laughing....

I will have to look on ebay for a good budget patch bay, spotted a mixer as well..the mackie 1202v i think it was.....surely i can get these for not too much outlay.

Thanks for your help

[Onkel Dunkel]

Basicly every input and output goes to the patchbay (as long as it makes sence). This is why it´s such a great thing. You can route a signal from and to every piece of gear in your studio with a single patch cable (or 2 if stereo). If i have time tonight i will draw a schematic of my setup to explain...

[prophet]

Thank you, that would be brilliant, really appreciate it

Scott