VIRUS TI Problem thread

[steamyb]

Oh No



Does anyone have this problem?
when inserting headphones I get a good signal from the right channel and crackling/partial good signal in the left. It is cured by unplugging and re-inserting a couple of times.

Seems only to have happened after upgrading to 1.0.2r2

Could software affect the headphone outputs?

[Househead]

Originally Posted by tk

The tempo value has nothing to do with the actuall bpm given by the sequencer. The "tempo" value is only valid when you use the patch outside of the virus control.

Naming the patch: double click on the name in the part panel, then you can edit it.

tk

Thanks for quick reply TK...

[DIGITAL SCREAMS]

Originally Posted by steamyb

Oh No



Does anyone have this problem?
when inserting headphones I get a good signal from the right channel and crackling/partial good signal in the left. It is cured by unplugging and re-inserting a couple of times.

Seems only to have happened after upgrading to 1.0.2r2

Could software affect the headphone outputs?

Are you definitly sure its not your stereo headphones on their way out? I cant think of any logical reason why the Virus would do this....but then again I have no real understanding of just how software effects physical components....

Hope this gets answered/worked out soon. Keep us posted.

DS

[steamyb]

Yo DS

Headphones are OK.
It seems as if the TI needs to have "warmed up" a while before the headphone socket works correctly.

Access are looking into it....

Will let the board know how I get on

[steamyb]

Originally Posted by DIGITAL SCREAMS

Are you definitly sure its not your stereo headphones on their way out? I cant think of any logical reason why the Virus would do this....but then again I have no real understanding of just how software effects physical components....

Hope this gets answered/worked out soon. Keep us posted.

DS

The outputs worked after about 4-5 minutes but had a tiny bit of noise and some glitches during certain patch changes.
Access say I got a duffer ".....the headphone outs should be crystal clear...Please return your unit"

I'll have to wait at least another month for replacement.
I take it we are all Beta testing for Access now.

[DIGITAL SCREAMS]

The best way to beta test is get the general public to do it......think of all those different setup configurations. Theres only so much you can do working in an office.

Yes, its awkward....but at the same time...problems will get identified alot quicker and hopefully rectified quicker. This is what everyone wants.

DS

[Royalston]

Ive got a TI with SX 3.1 and Tiger 10.4.2

Bouncing Ti Audio results in crazy mangled sound - as if recorded at the wrong sample rate. Its very bad.

Any ideas?

ps. The Ti Crashes SX regularly - esp if you turn it off and on whilst using it in a project.

[ten]

You have to bounce down using 'export in realtime' mode.

ten

[Royalston]

gracias!

[Doc Jones]

I am using the beta software as there isn't any update on the website for pc at the moment. Here is my midi issue. This happens to both of my midi interfaces - echo layla24 and midex 8.

Problem - I lose my midi capabilities for my other synths once the TI is powered on.

Description - Open cubase sx 3.1 and create new project. Create midi track using echo layla in and echo layla out as the port. The out connects to a sound module/the in is from a SL880 controller. Play controller and can hear sound from sound module. Now, power on TI - in a few seconds the TI powers up, msg displays link established with usb, then another message about setting system clock to 48K (when it should be set at 44.1). After system clock msg, I can no longer use my midi interfaces and can now no longer play my sound module until I close out of that project and create a new project in cubase. This happens to both my layla and my midex 8.