Quote:
Originally Posted by MarkM13
Assuming the USB cable is not connected. Check the lower right
hand corner of the display as you play a note on your controller.
If it's displaying a 1/2 note the unit is receiving MIDI but on the wrong channel.
Default is channel one. Make sure your novation is sending one only channel one.
Also, check your config settings and make sure the "Virtual MIDI through" isn't selected.
HTH
M
|
I have the usb cable disconnected and i dont see the display on the snow you are talking about. I am thinking it must be something setup on the novation. Aside from setting to channel 1 is there anything else I should look for?