[grs]

Hey guys/gals, I was just tinkering with 'surround balance' on an "wobbly timing" arp part and tried invering the phase of the second out.
Turns out only the right channel phased out to zero.
The left channel on USB1 is 2 samples in front.
and even in the right channel you hear a click every now and then.
So being a curious type I repeated the experiment using only USB2 and USB3:
Result = perfect cancellation, no clicks.

Long story short and relevance to the timing issue I loaded "wobbly arp" project switched every part away from USB1 to USB2 or USB3, even the init patches up to part 16.
My wobbly arp arrangment now plays back without incident with the arps.
I still hear maybe a stray single percussion note like a kik or snare.. (yes, I push my TI). But nothing a few passes in mixdown wouldn't solve.

If this helps other -bad timing- users out please let us all know. Maybe windows is keeping usb1 for system sound or something.(dircect x ??)

[UPDATE] Seems the sample missalignment was confined to a complex patch on Part 13, init patch produced phase out usb1 to usb2 and moving the complex patch to Part 14 produced a phase out with no sample slip on the left channel. Result not wobbly arp.