My knob has gone stiff
 

Note to moderator: This is not about penises.

The cutoff knob on my Waldorf XT is getting increasingly stiff and is a bit hard to tweek. Does anyone have any tips or ideas to get it moving smoothly again. Is there anything I can apply?

Cheers,

D

Phwooar....matron....ooooh I say...Nay, nay and THRICE nay.....fnarrr fnarr etc etc


I recommend KY jelly....

[img]http://www.zetaminor.com/.../ carry_again_hattie.jpg
[/img]

Re: My knob has gone stiff
 

But the moderators topics of choice usually includes a cock somewhere along the line.

Seriously though, XY is far too expensive. Eat some sugary chocolate, then spit on the area that needs to be friction free. :D

You a fan of it then?

It's better than a shoehorn....

Can somebody sort that image out for me please? It's integral to the thread. (and then tell me how to do it?)

maybe spray some wd40

You reakon this'd work?

ya I would pull the plastic knob off and spray a bit on the metal part

I hope you have not used WD40 yet... Never spray WD40 on an electronic device. This is what you want to use and it works great!
http://www.deoxit.com/

Somehow i knew this was going to get nasty with that topic name :lol:

To the intended topic:
Like waketek said; never ever use standard lubricant for electronic devices. You need some contact cleaner with lubricant. Doesn?t need to be a specific brand. Go to your local electronic shop and ask for some contact cleaner with lubricant and make sure you turn off power before using it and leave it for a while so that it can vapourise before turning power back on. If you are familiar with soldering you could of course change the potmeter. This might even be cheaper :roll: